| Type PC-M3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Welding range |
Min. dia. 1/4'' (dia. 6 mm), max. dia. 1.18'' (dia. 30 mm) or internal thread #8 to 0.71'' (M4 to M18) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Height of pad |
Min. 0.16" (4 mm), max. 1.18'' (30 mm) |
|
|
| Welding material |
Weldable, high and low alloys, mild steel |
| Welding rate |
Depending on dia. 12 pieces/min (dia. 1.10'' (28 mm) approx. 2 to 4 pieces/min) |
|
|
|
|
| Welding current |
300 to 1,000 A stepless remote controllable |
|
|
| Welding time |
5 to 3,000 msec stepless remote controllable |
|
|
|
|
| Primary power |
480 V, 32 A (IT 1001); 115/230 V (PC-M3) |
| Gas connection |
Series |
| Air pressure connection |
6 bar/inner hose dia. 1/4'' (6 mm) |
|
|
|
|
| Power source |
Inverter |
| Controller |
IPC Pentium P III, 500 MHz |
| Programming modes |
Welding current, welding time, any motion profile, welding piston, shielding gas |
| Welding head |
Linearmotor driven |
|
|
|
|
|
|
| Field former unit |
Tempered |
| Pneumatic work stroke |
4.72'' (120 mm) |
| Height adjustment |
9.84'' (250 mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Order No. |
According to project |
|
| Description |
Application
-
The most effective as well as most economical welding procedure for the welding hollow cylindrical parts
Featrues
-
Welding head with linear motor
-
Integrated process control for quality assurance
-
PC-controlled
-
Welding time approx. 800 msec with dia. 30 mm
Welding
-
Minimum plate thickness ≈ 1 mm, maximum plate thickness ≈ 4 mm
-
Minimum wall thickness of pad in the welding section ≈ 1 mm
-
Welding of end caps on pipes
-
Gas tight to over 250 bar (M10)
Description
-
Even and minimal heat input (low distortion)
-
Very short welding time (≤ 1 second) and consequently short cycle time in production
-
No welding commodities required
-
Minimum upsetting force
-
Small and even welding collar
-
Only one-sided accessibility to the work piece required
-
No reworking of work piece or welding element (thread)
|
|
